/ 
Technological Empire Starts From Shanzhai System Chapter 131
Download
https://novelcool.info/novel/Technological-Empire-Starts-From-Shanzhai-System.html
https://novelcool.info/chapter/Technological-Empire-Starts-From-Shanzhai-System-Chapter-130/10027155/
https://novelcool.info/chapter/Technological-Empire-Starts-From-Shanzhai-System-Chapter-132/10027157/

Technological Empire Starts From Shanzhai System Chapter 131

  Chapter 131 I just want to ask: Is this scientific?

   Seeing this scene, people became even more admirable for Lin Xuan. In one day, the yield rate of 90nm chips doubled to 15%.

   It only took one day to create such a miracle. If Zhongxin International wanted to increase the yield rate of 90nm products from 7% to 15%.

   I am afraid that the cost of funds will be at least tens of millions, which means that it will take more than 20 or even 30 or 40 times to achieve such a result.

   And Lin Xuan gave some improvement suggestions, which directly increased the yield rate of the chip to a terrifying level of 15%.

   Having created such a result, Lin Xuan was not arrogant and arrogant, but calm. Seeing Lin Xuan's appearance at this time, they immediately became more admirable.

   "Mr. Lin, thank you very much."

  Professor Chen suddenly came to Lin Xuan, and then bowed deeply, his face full of gratitude.

  Lin Xuan's achievements this day undoubtedly saved Zhongxin International tens of millions of funds and at least two months of trial production time!

   It has greatly improved the progress of Zhongxin International's official mass production of 90nm chips, which is for Zhongxin International who is now in financial distress.

   It is no less than getting a lifebuoy when falling into the water, so Professor Chen bowed slowly, deeply grateful to Lin Xuan.

   "Professor Chen is too famous, and now it is only 15%. With this good product rate, Zhongxin International's production is still in a state of loss, and it can turn losses into profits and make money in mass production."

  The mere 15% good product rate is still not up to Lin Xuan's requirements, and Lin Xuan's goal is not just 15%.

   "Can you continue to improve the yield rate?"

  At this moment, Jiang Haizhou, vice president of Zhongxin International, looked at Lin Xuan in shock.

   "That's right, this is just the first step of testing. I'll go to the production line later and give some suggestions for improvement."

  Looking at Lin Xuan's faint smile, the scene was instantly shocked!

  Lin Xuan can actually increase the yield rate? !

  Yesterday, according to Lin Xuan's request, Zhongxin International made minor modifications to the equipment and improved the process steps.

   As a result, it only increased by 7% in one day, so what kind of effect will it be after the second transformation according to what Lin Xuan said?

  Thinking of this, people looked at Lin Xuan in amazement, with disbelief written in their eyes!

   "Then I will go to work first."

  Amid the shock and horror of the people, Lin Xuan waved his hand at Professor Yang, and was about to look at the production line pretendingly, and then write out various suggestions for improvement.

"OK."

   Facing Lin Xuan's plan to improve the quality rate, Professor Yang naturally nodded hurriedly.

  Originally, he was going to invite Lin Xuan to have a good meal and drink to celebrate, but he didn't expect that Lin Xuan would not be satisfied with the 15% increase in good product rate.

   Actually still want to continue to put forward improvement suggestions today, and continue to increase the yield rate of 90 nanometers.

  Under such circumstances, Professor Chen naturally nodded with joy and agreed.

   Not long after, the reporters learned from Professor Chen who walked out of the factory that Lin Xuan only took one day.

  The news that the yield rate of 90nm has increased by 7%, so that the yield rate of 90nm has increased to 15%.

  As soon as the news came out, the reporters on the scene were in an uproar!

real or fake?

  Lin Xuan gave suggestions for renovation yesterday, but it turned out that only one day passed.

  The good product rate of Zhongxin International increased by 7% overnight, reaching 15%. Is this true or false? Is this scientific?

  Hundreds of reporters at the scene showed expressions of shock and horror.

   But soon, their shock and horror turned into a look of surprise, and at the same time they frantically snapped the cameras in their hands!

  That night, major newspapers and Internet media reported in the form of headlines that the good product rate of Zhongxin International had broken through to 15% in just one day!

  As soon as the news came out, a fire was ignited by the heat that was about to decline. In an instant, countless people in Daxia stopped their work and carefully read the reports.

  When they knew that Lin Xuan had actually made an important contribution to the yield rate of 90nm chips.

  In just one day, Zhongxin International's 90nm chip yield rate increased from 7% to 15%, and they all showed expressions of horror.

real or fake?

  So Lin Xuan really has a wealth of knowledge in the electronics industry, and has made a huge contribution to the yield rate of chips in just one day?

   At this time, after so many days of media bombardment, people have a little understanding of the yield rate of chips.

  Know that the chip actually has thousands of processes, and each process will have an important impact on the final chip yield.

  At this time, from Lin Xuan's shot to the present, it only took one and a half days to increase the yield rate of Zhongxin International's 90nm chips by 7%, reaching the level of 15%. They were shocked and astonished.

  So following the announcement of the news, reporters from all over the country were dispatched!

  They are divided into several parts, the most important part is to go to Zhongxin International to wait for the latest news.

  The other part is to go to Sichuan Province to interview Hantang Technology, or go to Boning City to interview Xu Hua who had mocked Lin Xuan before.

   Or go to Wandao to interview Cai Jie of Lianfuke or TSMC, which is also the overlord of the purchasing agent industry.

   It's just that this time they didn't know whether it was bad luck or something, no matter which bosses who had ridiculed Lin Xuan before, they couldn't find any of them, as if they were all hiding.

  Hantang Technology, at this time Ni Guangnan put down the newspaper in his hand, with a gratified expression in his eyes.

   Lin Xuan was actually able to put forward various suggestions for improving the yield rate of the chip, and the effect was not bad. In just one day, the yield rate of Zhongxin International directly doubled to 15%.

  At this time, Ni Guangnan has confidence in Lin Xuan's desire to rely on a one-stop solution to defeat Lianfake and Bodao Mobile!

  Wandao, Hsinchu Industrial Park, in the CEO's office of TSMC, the core of the entire Hsinchu Industrial Park.

   "Boom boom."

  There was a knock on the office door.

"Come in."

Chen Damou in    said something softly, and soon, his female secretary came in with a graceful body. At this time, there was a trace of worry on her face:

   "Boss, you let me focus on the latest news from Zhongxin International."

"Ok."

  Chen Damou hummed softly, then took the newspaper handed over by the female secretary and looked down.

"what?!"

  The newspaper in Chen Damou's hand could no longer hold it and fell on the table.

   What did he see? !

  He saw Zhongxin International, the strongest opponent of TSMC, Zhongxin International, which is currently the fourth largest chip foundry in the world.

   Actually increased their 90nm process technology from 7% to 15% yield, and all this only took one day.

"How is this possible?!"

  Chen Damou showed a shocked and surprised expression!

  Before founding TSMC, Chen Damou worked for Texas Instruments for many years. He is also an entrepreneur who came from the front line.

  So he even knows how difficult it is to increase the yield rate of chips. When he led the team to improve the yield rate at Texas Instruments in the US Empire, it was a road of blood and sweat.

  At this time, although he founded the TSMC store, he also broke away from the front-line position and became the leader of the TSMC store.

  Although TSMC has a top talent named Liang Guoshi, even so, improving the yield rate of chips is a road of blood and sweat.

  Now TSMC claims to have mastered the 45nm process technology and achieved mass production of chips, but mastering is mastering.

  Although TSMC has mastered the 45nm process technology, the yield rate of 45nm chips is also very worrying, with a yield rate of less than 38%.

  They claim to have mastered the 90nm process technology, just like Zhongxin International now, but the actual mass production is indeed a problem.

  They are like Zhongxin International, which can't make money at all by producing 90nm chips, and they lose a lot of production!

  If you don't produce that kind of expensive chips, it will be very difficult to mass produce 45nm chips!

   Unless there is a big boss to bear the loss of this improved process to improve the yield rate for TSMC, otherwise the current state of TSMC.

   At the earliest, it will not be mass-produced until the end of 2005.

   But at this time, Chen Damou didn't know that he was thinking too much, because according to history, shortly after the new year passed, that is, next year, a high-level incident at the TSMC store would happen!

  Because according to history, Chen Damou will resign as CEO in a few months!

  Hanging in the air!

  According to the history of the previous life, TSMC will carry out a high-level event in which high-level officials compete for power and profit.

   Then Liang Guoshi, who is now in charge of improving the yield rate, a great talent in the field of chip manufacturing, will eventually be refrigerated by TSMC because of his superior position, and he will be transferred to a position that has nothing to do with improving the process technology!

  As Liang Guoshi was transferred away, TSMC's 45nm mass production was naturally delayed.

  According to history, TSMC finally reached the yield rate of 45nm mass production in 2007.

   It can be seen that the high-level incident at TSMC a few months later has a serious impact on the process technology of TSMC, directly delaying the landing of 45nm by nearly 2 years!

   And this is not the most serious, because this high-level incident caused Liang Guoshi's failure in the competition to be the vice president of R&D to be frozen, and Liang Guoshi was also disheartened.

  According to history, Liang Guoshihui joined Sanxing Electronics after leaving TSMC in 2009.

  After joining Sanxing Electronics, I can only say that Liang Guoshi is worthy of being Liang Guoshi, and he directly made Sanxing Electronics surpass TSMC's 16nm in terms of process technology!

  As soon as the 14nm process technology came out, it directly snatched the chip orders that belonged to TSMC and Apple, which made TSMC gnash its teeth with hatred, and then TSMC bit Liang Guoshi like a mad dog.

   Afterwards, Liang Guoshi had no choice but to leave Sanxing Electronics, and finally joined Zhongxin International.

   Let Zhongxin International's 28nm chip yield jump from 3% to 85%! Directly let Zhongxin International take off in place, and then let Zhongxin International's process technology jump all the way to 14 nanometers.

   It can be said that a high-level incident a few months later had a profound impact on TSMC.

   It has even had a profound impact on the semiconductor production pattern of the entire world, especially in East Asia.

   Thank you Pinzhongke

Endless

   West wing scholar

   0The surname of the Ming Dynasty0

   Supported by the monthly pass of the four brothers!

   Ask for another ticket, there are so few flutters recently!

  (end of this chapter)

Chapter end

Report
<<Prev
Next>>
Catalogue
Chapter 651
Chapter 650
Chapter 649
Chapter 648
Chapter 647
Chapter 646
Chapter 645
Chapter 644
Chapter 643
Chapter 642
Chapter 641
Chapter 640
Chapter 639
Chapter 638
Chapter 637
Chapter 636
Chapter 635
Chapter 634
Chapter 633
Chapter 632
Chapter 631
Chapter 630
Chapter 629
Chapter 628
Chapter 627
Chapter 626
Chapter 625
Chapter 624
Chapter 623
Chapter 622
Chapter 621
Chapter 620
Chapter 619
Chapter 618
Chapter 617
Chapter 616
Chapter 615
Chapter 614
Chapter 613
Chapter 612
Chapter 611
Chapter 610
Chapter 609
Chapter 608
Chapter 607
Chapter 606
Chapter 605
Chapter 604
Chapter 603
Chapter 602
Chapter 601
Chapter 600
Chapter 599
Chapter 598
Chapter 597
Chapter 596
Chapter 595
Chapter 594
Chapter 593
Chapter 592
Chapter 591
Chapter 590
Chapter 589
Chapter 588
Chapter 587
Chapter 586
Chapter 585
Chapter 584
Chapter 583
Chapter 582
Chapter 581
Chapter 580
Chapter 579
Chapter 578
Chapter 577
Chapter 576
Chapter 575
Chapter 574
Chapter 573
Chapter 572
Chapter 571
Chapter 570
Chapter 569
Chapter 568
Chapter 567
Chapter 566
Chapter 565
Chapter 564
Chapter 563
Chapter 562
Chapter 561
Chapter 560
Chapter 559
Chapter 558
Chapter 557
Chapter 556
Chapter 555
Chapter 554
Chapter 553
Chapter 552
Chapter 551
Chapter 550
Chapter 549
Chapter 548
Chapter 547
Chapter 546
Chapter 545
Chapter 544
Chapter 543
Chapter 542
Chapter 541
Chapter 540
Chapter 539
Chapter 538
Chapter 537
Chapter 536
Chapter 535
Chapter 534
Chapter 533
Chapter 532
Chapter 531
Chapter 530
Chapter 529
Chapter 528
Chapter 527
Chapter 526
Chapter 525
Chapter 524
Chapter 523
Chapter 522
Chapter 521
Chapter 520
Chapter 519
Chapter 518
Chapter 517
Chapter 516
Chapter 515
Chapter 514
Chapter 513
Chapter 512
Chapter 511
Chapter 510
Chapter 509
Chapter 508
Chapter 507
Chapter 506
Chapter 505
Chapter 504
Chapter 503
Chapter 502
Chapter 501
Chapter 500
Chapter 499
Chapter 498
Chapter 497
Chapter 496
Chapter 495
Chapter 494
Chapter 493
Chapter 492
Chapter 491
Chapter 490
Chapter 489
Chapter 488
Chapter 487
Chapter 486
Chapter 485
Chapter 484
Chapter 483
Chapter 482
Chapter 481
Chapter 480
Chapter 479
Chapter 478
Chapter 477
Chapter 476
Chapter 475
Chapter 474
Chapter 473
Chapter 472
Chapter 471
Chapter 470
Chapter 469
Chapter 468
Chapter 467
Chapter 466
Chapter 465
Chapter 464
Chapter 463
Chapter 462
Chapter 461
Chapter 460
Chapter 459
Chapter 458
Chapter 457
Chapter 456
Chapter 455
Chapter 454
Chapter 453
Chapter 452
Chapter 451
Chapter 450
Chapter 449
Chapter 448
Chapter 447
Chapter 446
Chapter 445
Chapter 444
Chapter 443
Chapter 442
Chapter 441
Chapter 440
Chapter 439
Chapter 438
Chapter 437
Chapter 436
Chapter 435
Chapter 434
Chapter 433
Chapter 432
Chapter 431
Chapter 430
Chapter 429
Chapter 428
Chapter 427
Chapter 426
Chapter 425
Chapter 424
Chapter 423
Chapter 422
Chapter 421
Chapter 420
Chapter 419
Chapter 418
Chapter 417
Chapter 416
Chapter 415
Chapter 414
Chapter 413
Chapter 412
Chapter 411
Chapter 410
Chapter 409
Chapter 408
Chapter 407
Chapter 406
Chapter 405
Chapter 404
Chapter 403
Chapter 402
Chapter 401
Chapter 400
Chapter 399
Chapter 398
Chapter 397
Chapter 396
Chapter 395
Chapter 394
Chapter 393
Chapter 392
Chapter 391
Chapter 390
Chapter 389
Chapter 388
Chapter 387
Chapter 386
Chapter 385
Chapter 384
Chapter 383
Chapter 382
Chapter 381
Chapter 380
Chapter 379
Chapter 378
Chapter 377
Chapter 376
Chapter 375
Chapter 374
Chapter 373
Chapter 372
Chapter 371
Chapter 370
Chapter 369
Chapter 368
Chapter 367
Chapter 366
Chapter 365
Chapter 364
Chapter 363
Chapter 362
Chapter 361
Chapter 360
Chapter 359
Chapter 358
Chapter 357
Chapter 356
Chapter 355
Chapter 354
Chapter 353
Chapter 352
Chapter 351
Chapter 350
Chapter 349
Chapter 348
Chapter 347
Chapter 346
Chapter 345
Chapter 344
Chapter 343
Chapter 342
Chapter 341
Chapter 340
Chapter 339
Chapter 338
Chapter 337
Chapter 336
Chapter 335
Chapter 334
Chapter 333
Chapter 332
Chapter 331
Chapter 330
Chapter 329
Chapter 328
Chapter 327
Chapter 326
Chapter 325
Chapter 324
Chapter 323
Chapter 322
Chapter 321
Chapter 320
Chapter 319
Chapter 318
Chapter 317
Chapter 316
Chapter 315
Chapter 314
Chapter 313
Chapter 312
Chapter 311
Chapter 310
Chapter 309
Chapter 308
Chapter 307
Chapter 306
Chapter 305
Chapter 304
Chapter 303
Chapter 302
Chapter 301
Chapter 300
Chapter 299
Chapter 298
Chapter 297
Chapter 296
Chapter 295
Chapter 294
Chapter 293
Chapter 292
Chapter 291
Chapter 290
Chapter 289
Chapter 288
Chapter 287
Chapter 286
Chapter 285
Chapter 284
Chapter 283
Chapter 282
Chapter 281
Chapter 280
Chapter 279
Chapter 278
Chapter 277
Chapter 276
Chapter 275
Chapter 274
Chapter 273
Chapter 272
Chapter 271
Chapter 270
Chapter 269
Chapter 268
Chapter 267
Chapter 266
Chapter 265
Chapter 264
Chapter 263
Chapter 262
Chapter 261
Chapter 260
Chapter 259
Chapter 258
Chapter 257
Chapter 256
Chapter 255
Chapter 254
Chapter 253
Chapter 252
Chapter 251
Chapter 250
Chapter 249
Chapter 248
Chapter 247
Chapter 246
Chapter 245
Chapter 244
Chapter 243
Chapter 242
Chapter 241
Chapter 240
Chapter 239
Chapter 238
Chapter 237
Chapter 236
Chapter 235
Chapter 234
Chapter 233
Chapter 232
Chapter 231
Chapter 230
Chapter 229
Chapter 228
Chapter 227
Chapter 226
Chapter 225
Chapter 224
Chapter 223
Chapter 222
Chapter 221
Chapter 220
Chapter 219
Chapter 218
Chapter 217
Chapter 216
Chapter 215
Chapter 214
Chapter 213
Chapter 212
Chapter 211
Chapter 210
Chapter 209
Chapter 208
Chapter 207
Chapter 206
Chapter 205
Chapter 204
Chapter 203
Chapter 202
Chapter 201
Chapter 200
Chapter 199
Chapter 198
Chapter 197
Chapter 196
Chapter 195
Chapter 194
Chapter 193
Chapter 192
Chapter 191
Chapter 190
Chapter 189
Chapter 188
Chapter 187
Chapter 186
Chapter 185
Chapter 184
Chapter 183
Chapter 182
Chapter 181
Chapter 180
Chapter 179
Chapter 178
Chapter 177
Chapter 176
Chapter 175
Chapter 174
Chapter 173
Chapter 172
Chapter 171
Chapter 170
Chapter 169
Chapter 168
Chapter 167
Chapter 166
Chapter 165
Chapter 164
Chapter 163
Chapter 162
Chapter 161
Chapter 160
Chapter 159
Chapter 158
Chapter 157
Chapter 156
Chapter 155
Chapter 154
Chapter 153
Chapter 152
Chapter 151
Chapter 150
Chapter 149
Chapter 148
Chapter 147
Chapter 146
Chapter 145
Chapter 144
Chapter 143
Chapter 142
Chapter 141
Chapter 140
Chapter 139
Chapter 138
Chapter 137
Chapter 136
Chapter 135
Chapter 134
Chapter 133
Chapter 132
Chapter 131
Chapter 130
Chapter 129
Chapter 128
Chapter 127
Chapter 126
Chapter 125
Chapter 124
Chapter 123
Chapter 122
Chapter 121
Chapter 120
Chapter 119
Chapter 118
Chapter 117
Chapter 116
Chapter 115
Chapter 114
Chapter 113
Chapter 112
Chapter 111
Chapter 110
Chapter 109
Chapter 108
Chapter 107
Chapter 106
Chapter 105
Chapter 104
Chapter 103
Chapter 102
Chapter 101
Chapter 100
Chapter 99
Chapter 98
Chapter 97
Chapter 96
Chapter 95
Chapter 94
Chapter 93
Chapter 92
Chapter 91
Chapter 90
Chapter 89
Chapter 88
Chapter 87
Chapter 86
Chapter 85
Chapter 84
Chapter 83
Chapter 82
Chapter 81
Chapter 80
Chapter 79
Chapter 78
Chapter 77
Chapter 76
Chapter 75
Chapter 74
Chapter 73
Chapter 72
Chapter 71
Chapter 70
Chapter 69
Chapter 68
Chapter 67
Chapter 66
Chapter 65
Chapter 64
Chapter 63
Chapter 62
Chapter 61
Chapter 60
Chapter 59
Chapter 58
Chapter 57
Chapter 56
Chapter 55
Chapter 54
Chapter 53
Chapter 52
Chapter 51
Chapter 50
Chapter 49
Chapter 48
Chapter 47
Chapter 46
Chapter 45
Chapter 44
Chapter 43
Chapter 42
Chapter 41
Chapter 40
Chapter 39
Chapter 38
Chapter 37
Chapter 36
Chapter 35
Chapter 34
Chapter 33
Chapter 32
Chapter 31
Chapter 30
Chapter 29
Chapter 28
Chapter 27
Chapter 26
Chapter 25
Chapter 24
Chapter 23
Chapter 22
Chapter 21
Chapter 20
Chapter 19
Chapter 18
Chapter 17
Chapter 16
Chapter 15
Chapter 14
Chapter 13
Chapter 12
Chapter 11
Chapter 10
Chapter 9
Chapter 8
Chapter 7
Chapter 6
Chapter 5
Chapter 4
Chapter 3
Chapter 2
Chapter 1
~
~
Setting
Font
Arial
Georgia
Comic Sans MS
Font size
14
Background
Report
Donate
Oh o, this user has not set a donation button.
English
Español
lingua italiana
Русский язык
Portugués
Deutsch
Success Warn New Timeout NO YES Summary More details Please rate this book Please write down your comment Reply Follow Followed This is the last chapter. Are you sure to delete? Account We've sent email to you successfully. You can check your email and reset password. You've reset your password successfully. We're going to the login page. Read Your cover's min size should be 160*160px Your cover's type should be .jpg/.jpeg/.png This book hasn't have any chapter yet. This is the first chapter This is the last chapter We're going to home page. * Book name can't be empty. * Book name has existed. At least one picture Book cover is required Please enter chapter name Create Successfully Modify successfully Fail to modify Fail Error Code Edit Delete Just Are you sure to delete? This volume still has chapters Create Chapter Fold Delete successfully Please enter the chapter name~ Then click 'choose pictures' button Are you sure to cancel publishing it? Picture can't be smaller than 300*300 Failed Name can't be empty Email's format is wrong Password can't be empty Must be 6 to 14 characters Please verify your password again