Super Craftsman Chapter 475

Chapter 475 - Another one that was shocked (2)

Guo Tailai was more satisfied with the result.

One couldn't blame others for not believing in his ability, because Guo Tailai had never shown it before. Elder Liu knew that Guo Tai Lai had this skill, and the Professor Wang also knew that Guo Tai Lai had become more and more skilled in the high precision lathe art, but the Technical managers did not know that.

Even though others had told him that Guo Tailai had done these before, and made the high precision gyro, he still felt that it was still prudent to keep improving according to the rules. In fact, this was what most people who knew about this project thought. The only ones who really supported Guo Tailai were the few people in the school.

This way, Guo Tailai didn't have to dig out the absolute plane under everyone's noses, he could just find a place to do it.

However, the choice of this address was not an easy matter. To achieve an accuracy of 50 nm, Guo had to consider a constant temperature and no vibration. This is not the same as making the knitting lampshade and chips for those people in the company.

There was no blueprint for the woven ball lampshade. This fiber was slightly off and the angle of the winding was slightly different, so no one could tell. The A.I. Chip was even more accurate. The two transistors were very close, and the other two were very far away. Who would be able to measure them with such precision?

But the absolute plane was different. In order for Guo to be less than 50 nm in plane size, there were some things that had to be considered. The temperature varies by a few degrees, and I'm afraid the difference in height between the unfinished plates will exceed 50 nm. Gravity influence also had to be considered, this was to be a high accuracy absolute plane, it was the most basic foundation of the NC Machining Center. If there was a problem with the accuracy of this, the absolute accuracy of the processing center would be affected, and it would even be magnified. With all the benchmarks having problems, it would be strange if the finished workpieces could have accuracy.

There was no need to talk about vibrations. Although the thick vibrations from the cast iron plate did not have much of an impact, Guo Tailai was more eager to reach the pinnacle. There were a few flaws that made Guo Tailai uncomfortable, especially when it came to trying to reach the limit of 50 nm. Guo had to minimize the factors that affected him.

Therefore, before he came back from overseas, Guo Tai Lai called Zhao Xiangbei to ask him to find a suitable place to stay, it had to be constant temperature and constant humidity, and the land had to be solid and flat.

Zhao Xiangbei did not think that Guo Tai Lai was making a big fuss out of nothing. He knew what Guo Tai Lai wanted to do and supported him very much. operating room s were on an island in a lake at the outskirts of the capital. He cleaned everything up and waited for Guo Tai to go to work.

After going through Huang Weiguo and the others' tests, the room didn't have any problems with it. The light was also the same for the operating room level, which was a large area without shadow, and the light was bright and gentle, not dazzling at all. The temperature was constant at twenty degrees Celsius, and the error was negative. The ground was specially reinforced so that no change could be seen if a piece of cast iron plate was placed on it.

The Workroom was big enough that the specially designed forklift truck combined with the lifting device on top of it could be lifted from four directions without affecting the accuracy due to the gravity. Furthermore, the cast iron plate was not exactly three meters by three meters, but three meters by three and a half meters. The edge of the plate was considered to be a possible transport collision. In short, all the influencing factors were taken into account to the extreme.

Just pulling the cast iron plate over here had taken an entire day. The two workstations were laid out not far from each other, waiting for Guo Tailai to finish his work.

Guo Tai Lai chased everyone out, locked the Workroom's door, and let Huang Weiguo and the others keep an eye on him. Don't let anyone disturb him, he then ordered the rest of the people to start working.

In order not to affect the accuracy of his weight on the board, Guo had even built a movable table, where he could handle the center of the board by lying on the workbench that was five centimeters above the board.

The cast iron plate had gone through rough processing, but because the plate was too big, the accuracy of the process wasn't particularly high, it was almost 10% of a millimeter. Guo Tai Lai started from the edge, all the nanobot went up, and little by little they started to create the absolute plane.

The accuracy of this requirement was so high that Guo was afraid that his body would touch the plate and change the size of the plane due to the temperature. He was working on the plane from about one centimeter away, like giving acupuncture to a cast iron board.

For every ten centimeters by ten centimeters, Guo would cut the iron filings on the top to make a shaving illusion. Then he would blow them down with the air, not touching the board at all. Even when he was in the middle of the chopping board, Guo Tailai was lying on the movable workbench, handling it bit by bit. No contact at all with cast-iron plates.

For the entire five days, other than eating and going to the toilet, Guo Tailai had never left Workroom, he even slept in there. For the sake of the best accuracy, Guo Tailai could be said to be always focused. Within the past five days, he had lost 20 pounds, so everyone could imagine how much effort he had put in.

However, Guo Tailai was pleased to see that the two pieces of iron plates, which were no more than 50 nm and had neat shaving patterns, were actually made from three meters five by three meters. It was finally complete!

Guo Tai Lai gave the Professor Wang and Elder Liu a call to Zhao Xiangbei, asking them to come and check on him. The rest of the trouble would probably be transported to the right place, but that was not what Guo Tailai needed to worry about anymore, his job was done.

Less than an hour later, Professor Wang Elder Liu and Zhao Xiangbei arrived one after another. He was also with the Technical managers, but Guo Tai Lai didn't have his phone number, he was informed by the Professor Wang that they were here to check on him.

It was obvious that Technical managers was a little surprised, but after thinking about it, it was only two pieces of cast iron board, and they could still afford to lose, so he did not say much. But when he rushed over and saw the arrangement of the Workroom, his face changed. This Workroom, might not even have a few hundred thousand points, it was simply impossible to arrange. If Guo Tailai didn't pass, then the loss would be huge.

"Beautiful!" In contrast to Technical managers's nervousness, Elder Liu's face was full of smiles and heartfelt praise as he looked at the even and uniform scrape patterns on the surface.

"How is this possible?" When Technical managers used the optical micrometer to check a few points, he actually did not find any errors, causing Technical managers to scream on the spot.

Chapter end

Report