Super Craftsman Chapter 36

Chapter 36 - Upgrade (Part II)

"What's the coordinates?" Guo Tailai asked again.

"Control system upgrade conditions, obtained data from the dormant nanobot at the coordinates." The control system is described in detail.

You can even level up? Guo Tailai was overjoyed. As long as there were upgrade conditions, he wouldn't mind working harder.

What changes have occurred after the control system was upgraded? Guo Tailai didn't notice.

"What are the new features after the upgrade?" Guo Tailai asked in his mind.

"Feel free to feel around." The control system gave a rather speechless answer. This was not the first time. When Guo Tailai first obtained the control system, he did not know what to do nor did he know what to do. He had to figure it out himself.

Forget about the others, but Guo Tailai would definitely want to test his processing ability. He had to confirm that he had the qualification to guarantee the research now, and that he could earn more than a hundred thousand yuan.

He was in Elder Liu's Workroom, and there were so many tools. He casually found a piece of scrap steel and placed it on the workbench, and Guo Tai Lai started with the most basic file cutting, going through the same craftsmanship test.

Stable, unprecedented stableness. From the moment he picked up the file, Guo became aware of the difference.

A hundred times increase in nanobot not only gave Guo Tailai greater control over the muscles in his arms, it also gave him full control over all the muscles in his body.

In the process of processing, the stability of the hands which was caused by the involvement of all the muscles was completely different from before, where only a small part of the arms and shoulders could be combined with the muscles of the legs. If the previous processing stability of 10, then now it could definitely be up to 100.

Just the file itself, after Guo Tailai had changed the most delicate file, once it was filed down, the onlookers would see that it was just a false scratch, and not much effort at all. However, Guo Tailai's eyes could clearly see that the surface of the workpiece had been cut off by 0.5 micron.

Yes, the processing accuracy of the file, can already let Guo Tai Lai accurately reach 0.5 micron, this can already surpass most high precision NC Machining Center. Most of the remaining processing center s could only do this much. Perhaps only a few of the most powerful processing center s could be a little stronger than Guo Tai Lai's hand, but it was still very limited.

Next were the other tools. They were all tested one after the other. Except for the fact that the work of the saw itself was unlikely to reach a high accuracy, all the other tools had been greatly improved.

All in all, said Guo Tai Lai handwork can be processed to 0.5 micron machining accuracy is no problem at all.

Another discovery surprised Guo, saying that nanobot could consume a lot of lactic acid produced during their work and exercise.

Last time when he was processing the crankshaft and leaves, due to the lack of time, he would accumulate a lot of lactic acid every time he finished processing them. Guo Tailai's arm was in unbearable pain, and afterwards, he had to rest and massage a lot to get rid of them.

This time, the same symptoms appeared. Guo Tailai also sent out an order to clear away the lactic acid, and the nanobot immediately began carrying out the order.

nanobot could burn fat to gain motivation, and lactic acid, a product that wasn't completely metabolized, could also be used. The only regret was that the number of robots was too small, only at one million, so the huge amount of lactic acid produced by muscle movements couldn't be removed in time.

Perhaps he would only be able to do it when his quantity increased again. At that time, perhaps Guo Tailai would be an indefatigable person.

The effect of increasing the quantity by a hundredfold was to increase the rate at which fat was consumed under normal circumstances by a hundredfold. This meant that the weight loss effect would be increased by a hundredfold. Originally, it would have taken sixty thousand years. But now, it only needed six hundred years.

Of course, he could not do it like that. He could use the nanobot to control the muscles' movement because it consumed the fat stored in his body. He could only control the movement speed because he did not want to lose weight. It was no problem for Guo Tailai to lose weight.

The titanium powder was not safe in that small sealed test tube. Taking advantage of the time at Elder Liu's Workroom, Guo Tailai easily made a hollow steel pendant. He poured the rest of the titanium powder in and screwed it in properly, then patiently made a stainless steel necklace, and hung the pendant around his neck.

Actually, the titanium powder stored within his body were already more than enough to replicate billions of nanobot. But who knew how they would change in the future?

After making the necklace, Guo Tailai walked back to his dorm happily. After having a game of cards with his roommates to celebrate, he lay on his bed looking forward to his future and fell asleep.

"I don't need to explain the principle of the assembly stress, you should know that." The next day, Guo Tai Lai continued to learn assembling from Elder Liu. Elder Liu explained step by step, and Guo Tai Lai had already learned how to fasten the assembly screws. "Let's start with the torque of the upper screw."

It was not difficult for Guo Tailai to match the accuracy of the previous words. His eyes could measure the current accuracy, allowing Guo to be more accurate than when he was at his peak. He could even handle the most demanding assembly of cylinders and pistons, vertical or parallel to one another, without many adjustments.

Today we talk about the connection fastening part of the precision instrument, which involves the degree of the screw fastening and the tool with the torque. Those with the design and assembly requirements naturally adjusted the torque according to the design and didn't have it. They needed to rely on their own experience to determine if it was too tight or too loose.

The torque measurement naturally required a torque measuring instrument. The measuring instrument in locksmith's workshop was already able to be precise to 1 cow of rice. Guo Tailai held the torque tester and operated it tirelessly. Then he measured and felt it.

"Do you want to record the torque measurement?" After measuring his senses for more than a thousand times, Guo Tailai's mind received a message from the control system.

So it was like that. Guo Tailai didn't hesitate to record the measurement result. To be able to measure the torque with the help of the power in his hands was one of the new functions of the upgraded control system. For the whole day, Guo Tailai measured and recreated the energy within the locksmith's workshop, quickly mastering the 1 cow of precision torque control.

Of course, there was the ability to control the strength of both hands and the precise measurement of the length of the arms. Among these, a common set of weights in the workshop also allowed Guo to feel the quality of one gram of precision measurement with one hand.

"Senior sister, does the laboratory have any precise torsion measuring instruments? How accurate is your weight? " With the 1 gram of precision needed for the torque and the 1 gram of quality, it was impossible for him to satisfy it. The next day, he headed straight to the laboratory to ask Zhao Yanyan.

Chapter end

Report