Starting Off With A Blacksmith Workshop Chapter 292

The second machining center was running smoothly. On the third day, a workpiece was in this smooth operation. The workpiece was machined to the limit of precision, and the many workers standing by were all looking at the transparent protection. Workpieces inside the hood.

It took more than an hour to watch this. They hardly missed any second. They kept staring at the machine tool running. When the tool in the machining center was put back into the tool magazine by the mechanical arm, the whole machine slowly slowed down. down, then stopped running.

Li Zhenhua also took these four assistants, opened the transparent forehead protective cover, five people entered the machining center, and unloaded the workpiece that had been processed from the fixture, and then several people carefully moved the workpiece out and put it in a on the monitoring platform.

In fact, Li Zhenhua already knew the machining accuracy of this workpiece, but the workers around him didn't know it, and he couldn't tell them that the machining center fully met the accuracy standards, because he had already passed the analysis of his eyes.

So under his orders, a worker turned around and went to the professional precision measuring equipment. The electronic precision tester was moved to the side of the workpiece by everyone, and then began to measure the workpiece.

After this measurement, they all became extremely excited. Such a large machining center can actually control the precision so well. It really meets the original design standards. It is really an ultrhigh-precision machine. giant machining center.

After the precision test was over, the eyes of all the workers lit up, and they were already thinking about how important their future work would be.

This is equipment that can greatly improve the machining accuracy of Kyushu, and it is such a huge equipment. Although it is not manufactured by them, they are indeed the specific users of this kind of machining center in the future, which makes all the workers very happy.

Because Li Zhenhua is the designer of his equipment, he will not stay here for a long time, so the specific users are still these people, and they are all looking forward to their work and life in the future.

When the manager of the Ministry of Industry saw that the machining accuracy of the workpiece was in full compliance with the previously set standards, he was also excited. He felt that he could report to the higher authorities at this time, and the project was considered a success.

This is not just one, but the second one has been manufactured now. After this machining center is manufactured, there will be a third, a fourth... until the tenth.

In other words, they will eventually have ten such ultrhigh-precision giant machining centers. I believe that their high-precision workpiece processing will definitely be able to make their own reputation in the field of processing.

Thinking of the management personnel of the Ministry of Industry here, they silently retreated from the factory building. When they came outside the workshop, they took out their mobile phones and called their immediate superiors. He reported the results achieved by the company in detail. .

When he finished reporting on the work here, the smile on his face never broke, and he kept a smile on his face all the time, especially after he had just talked with the leader on the phone.

The leader of the Ministry of Industry, located in the Beiping Government Administration Council, was so happy that he almost jumped out of his chair after receiving the call just now.

Because this project did not pay too much attention to safety issues at the beginning, and their Ministry of Industry did not fail, but everything they did was in line with the process, and the vice president did not blame them, but just warned them.

But in the current situation, enough achievements have been achieved, no matter what, they were achieved under their leadership. The leaders of the Ministry of Industry recorded all the situation they just learned on a piece of paper.

Then he took the paper in his hand, came out of his office, walked towards the place where the deputy dean worked, came outside the door of the vice dean's office, reported to the leader's secretary, and then waited for a long time.

After waiting for a long time, the leader of the Ministry of Industry finally met the vice president and reported the news he received to the vice president in detail.

The time for this report is not short, and the vice president has understood the whole project from the Ministry of Industry in detail.

After the leader of the Ministry of Industry left from the side of the vice president, he made a few phone calls in the office. what happened in the city.

After all the elders finished the tasks at hand, they also started to return to Beiping by means of transportation. This matter had a huge impact, so they had to meet and talk, and make a new plan for Kyushu.

The leader is controlling the direction of the big ship of Kyushu, and everyone on Li Zhenhua's side has resumed their previous work status after experiencing the excitement.

However, what happened in the factory has nothing to do with Li Zhenhua. He just wants to go as fast as he can, finish the work here, and then go home quickly to enjoy the life of his wife and children.

After having two machining centers, the processing progress of the workers has improved again, but the overall progress has improved somewhat. After all, Li Zhenhua only has one, and all the machining centers with this precision are fundamentally made by him. It was rolled out, so the overall progress is still the original speed.

The third machining center started work, and the workers in the factory area here are indeed divided into two groups at the moment, and the first group is still doing the original work, which is to finely process the workpieces of the machine tools.

The other group of people started a new job. They took the drawings of the next-level precision machining center submitted by Li Zhenhua, and started the manufacture of the next-level machining center with some ordinary raw materials.

There are two groups of people, none of which occupies an ultrhigh-precision machining center. After such a layoff and manufacturing, many workers have become more and more comfortable with the machining center used in their hands.

Under their rhythm, Li Zhenhua slowly assembled the third machining center, and at this time, two months had passed since he came here.

In the past two months, he went home a total of one time, but only stayed at home for two short days, and then returned to the Daocheng factory to continue working.

At this time, when Li Zhenhua was not working, he also began to think of the invitations of Wang Yuesheng and other heads, and he immediately found information on projects such as Nantianmen and Luanniao on the Internet.

Of course, the information found on the Internet is definitely not real information. These are all simple information collected by netizens, sorted out, and many netizens added their imaginations during the process.

But for Li Zhenhua, these fantasies are exactly what he needs. He does not know what the real Nantianmen Project and Luanniao Project look like, but these have been processed by the brains of the vast number of netizens in Kyushu, but they are even more complicated. sci-fi.

As far as the overall project is concerned, although the plan processed by netizens' brains may seem unreliable, but in fact it is very in line with the direction of these projects.

So after he collected all the information on the Nantianmen Project and the Luanniao Project on the Internet, he took advantage of the evening break to simulate the project direction he knew in the virtual laboratory.

And whenever he encounters difficult or incomprehensible problems in the virtual laboratory, he will write down the relevant things first, and wait until the next day to call the dean of the Kyushu Academy of Sciences and get them from the Kyushu Academy of Sciences. some books.

After the books he needs arrive, he can use the difference in time flow rate in the virtual laboratory to learn quickly, that is, to learn what kind of knowledge he encounters when he encounters any problems.

What he did was actually to go to the real project in the future, so that he would not be ignorant, and in fact, he was actually a kind of preview of the Nantianmen and Luanniao Project.

During Li Zhenhua's busy and fulfilling days, the processing centers in the back were also manufactured by him one by one.

Time seemed to press the fast-forward button, and another four months passed in a hurry. At this time, in the huge factory building of Daocheng New Company, the factory building is no longer as empty as before, but now the factory building is filled with ten huge five-axis linkage high-precision giant gantry machining centers.

The factory building is no longer as deserted as it used to be. All the workers have also come to the factory building to carry out various tasks. Everyone in the factory building is busy in front of their respective processing centers.

And the place with the fewest people inside is where Li Zhenhua is, because he doesn't need more people here, and the four assistants are enough if he is there, and no amount of people can help.

When he installed the last workpiece that had been finely ground in his hands on the machining center in front of him, his whole heart seemed to let go of something, and he felt so relaxed.

After he installed the workpiece, it meant that his work here was coming to an end, and he could go home without having to come back. Thinking of being able to be with Li Yun's mother and daughter for a while in the future, his whole heart was filled with joy.

Thinking of these, a slight smile unconsciously appeared on the corner of his mouth, but then he hid the smile, and then he began to test the last machining center in front of him. As long as the last machining center passed his test, then You can pack your things at night and be on your way home the next day.

As he brought out a mobile hard disk workstation and connected him to the control computer of the machining center, he began to install the control program of the machining center.

As the progress bar on the screen in front of him was increasing little by little, he stood aside and watched, but he didn't know what kind of feeling he felt in his heart. If he was proud, he must have some. Besides pride, there were also negative emotions such as fatigue and boredom. .

This project is the most boring and boring one he has done so far, but it is also the most significant and basic one.

Other projects do not have the foundation of this machining center, but none of them have had such a huge impact. Whether it is space suits or J-36, they are all at this level, but the significance of the machining center is at the level of all over the face.

When the progress bar came to the end, the screen in front of him went dark. Li Zhenhua disconnected the mobile hard disk workstation from the machining center, and then pressed the power button of the machining center.

The moment the power button was pressed, the screen in front of him turned on again, and the startup process of entering the program began. He also took advantage of this gap to put away his workstation.

When the screen went dark again and then turned on again, the machining center numbered 10 made a buzzing sound, which was the sound of the power system of the entire machining center starting to run.

As the buzzing sound continued, the machining center was performing a program self-inspection. Everything inside was under the control of the program and reset to zero. After the machining center quieted down and the sound became smaller, Li Zhenhua knew that It is the performance that the whole machining center is ready.

Now that the machining centers have been prepared, the subsequent monitoring procedures are still indispensable. Just now, there are sub-level machining centers in the factory building, so these workpieces can be manufactured by the tenth machining center.

Then he called the worker team leader who was working on this project, and explained the matter clearly to him. As for the next work, he was handed over to him to complete, while Li Zhenhua got away from it and just watched from the sidelines. That's it.

Then several workers used tools to push the blank of the workpiece over~www.mtlnovel.com~ and then opened the protective cover, locked the workpiece on the machining center, then imported the written control program into the system, and pressed the start button At that moment, the entire machining center began to operate.

Li Zhenhua was standing beside the protective cover of the machining center, looking at the machines running inside in a trance. He seemed to be in a trance, but he was actually staring at the machining accuracy of the workpiece with his eyes.

Since the workpiece was designed by him, all the parameters are well known, and under the monitoring of his analytical eyes, as long as there is a slight error in the machine tool, he can see it.

But at the end of the workpiece processing, the machining center perfectly manufactured the workpiece without any mistakes in the process, and also achieved the highest precision in his design.

There is no difference in accuracy from the previous nine, and Li Zhenhua feels that the operation of the last one may be the most stable among the ten machining centers.

The first one is relatively the most variable, this is because it is the first one, the first one born from his hands, so all the production processes are not so familiar, so it gives him this feeling .

The successful processing of a workpiece does not mean anything, so under his instruction, the test work continues, and one workpiece after another is finally processed by this machining center.

After the machining center has been running for an hour, the results are still as stable as before, which proves that the machining center has fully met his design standards, and in Li Zhenhua's mind, the acceptance has been completed.

After all ten processing centers were manufactured, he started to pack up and salute that night. He also told Ning Wei and others about going home the next day, and he would not be back in a short time after returning home. .

Chapter end