Starting Off With A Blacksmith Workshop Chapter 284

Under the huge sunscreen in the open space, there is a huge metal block, and a humanoid figure is busy on the metal block.

Before he started to move this piece of metal, he asked him to hold a sledgehammer around the metal block and knock it on a specific point. The internal stress of the metal block that had to be placed for many years to be released could only be released after he smashed it together. Next, all were released.

The release of internal stress can prevent these metal blocks from being deformed again when they are made into machine tool parts, thereby affecting the accuracy of the machine tool.

Wearing Chi You's power armor, he was busy beside the giant metal block. When the soldier wore Chi You, he held a gun in his hand, but when he wore it, he held a fitter's tool scraper.

The scraper made of special metal played a huge role in his hands. Strips of iron filings were scraped off the metal block by him, and the shape of the iron filings was so regular.

Don't think that he is holding a scraper in his hand, and he is only doing fine processing on the workpiece. In fact, he is not. Now that he is making rough blanks, he uses the scraper like a big axe. It feels like he is splitting wood with a big axe.

If you want to talk about why he does it himself from the beginning to the end, instead of using machine tools and other tools to make rough blanks first, it is not only because there is no suitable machine tool, but also because he has to manufacture it from the beginning and monitor it, and he must try his best His utmost ability guarantees its precision quality.

That's why he took so much trouble to make it from a raw blank to a rough blank, all for the sake of precision.

There are a lot of parts used in a machine tool, so there are a lot of parts he needs to manufacture.

The metal block was scraped from cubes of various sizes into rough workpieces of various shapes. The work he completed here was only rough blanks, but he could not make the rough blanks into complete workpieces. Those jobs had to wait until before final assembly.

However, the location of the final assembly is not in Kyushu Shenshou, but in the factory area of ​​Daocheng New Company, which is where the machine tools will be located in the future. While the machine tools are being assembled, rough blanks are finely processed into high-precision workpieces.

The manufacture of the entire machine tool is extremely troublesome, and various wires, shielded signal lines, and electronic system hardware installed in various parts will be interspersed in the middle.

Fortunately, this kind of work will be very difficult at the beginning. After the first ultrhigh-precision machine tool is born in his hands, the subsequent machine tool manufacturing will be much easier.

Because at that time, he will not need to process the parts manually, and the newly manufactured machine tool will come in handy. At this time, he uses the machine tool because he has confidence in his own machine tool.

Moreover, he still leaves some margins for the workpieces that come off the machine tool. These margins are when his humanoid machine tool plays a role, and this is also to ensure the accuracy of the machine tool.

When the factory of the new company is filled with such giant machine tools, then he will not participate in the machine tool manufacturing again, and the follow-up work will be done by the workers of the new company.

At that time, this new type of machining center that is being manufactured will enter the market as a commodity for purchase and use by manufacturers who need this equipment. Of course, not all manufacturers will need this kind of machine tool, but now in Kyushu, But there is an urgent need for such a giant ultrhigh-precision machining center.

In fact, this kind of machine tool is urgently needed in many military factories, such as underwater propeller blades of submarines, many parts of engines of fat girls, high-strength fuselages of fighter jets, keels of aircraft mothers, rocket manufacturing, aerospace and other places, All can be used.

Therefore, the demand for this kind of machining center is still quite large in Kyushu. In the case of these needs, the new company will definitely not worry about lack of work at the beginning.

And the significance of this kind of machining center is not limited to these. After this sub-level machining center satisfies a small number of departments that urgently need it, the rest will be arranged in three cooperative machine tool factories.

On the basis of the next-level machining centers, these three machine tool factories will upgrade the accuracy of domestic machine tools on a large scale, thereby improving the machining accuracy level of Kyushu as a whole.

The latter has the widest impact on society. The former ones cannot be said to have little impact, but this information will not be disclosed on a large scale, and the general public may not know it at all.

And after the level of machining is improved, especially after this kind of giant machining center is in the world, Kyushu will once again break the blockade of foreigners against us. The significance of this cannot be explained clearly in one or two sentences, and it may affect the formulation of some national policies and foreign policies in the future.

At least in this regard, Kyushu does not need to make too many compromises internationally, and Kyushu's spine can be straighter.

The metal blocks transported here, after his continuous efforts day and night, were finally made into rough blanks in his hands, and more than two months had passed by this time.

When he completed the rough processing of the last workpiece, a group of workers were dispatched from the aircraft manufacturing workshop, and then with the help of these people, he began to pack the workpiece.

Of course, these workers are also wearing powered exoskeletons. Without the help of equipment, their packing work will be difficult to carry on.

When the workpieces were carefully packaged one by one, Li Zhenhua found an antique transportation company and asked them to transport them by land.

A total of 60 container-type semi-trailers, these workpieces have been loaded from morning to night, and each car is only loaded with a bottom, and it is not stacked on the top at all. Some are so careful.

At this point in the work, in fact, the preparatory work is almost done, and the next step is to enter the new company and carry out substantive assembly and other work.

He pushed the hardware to this point, and he didn't lag behind in running the software. It should be said that the progress of the software is faster than that of the hardware.

After he finished drawing all the drawings, he began to manually extract the software from the inside of his head. Every day when he was in the office, he sat in front of the computer and began to type on the keyboard. The top-level mechanical keyboard had already been typed in his hands. It broke.

It can be seen how much work he has done on the software. Now the software he prepared is still based on the software compiled under the English system. Who made the English system mature after so many years of development!

At this time, he chose to use a relatively safe English system.

When he compiled the operating software of the machining center, he also conducted some research on the Kyushu language.

Moreover, this research really led him to research something. The Kyushu language system will produce many different interpretations in terms of language logic, and it is not rigorous when placed in machine language.

But it was this impreciseness that made him discover some particularly interesting phenomena. He used the software he developed based on the Kyushu language system to compile a language, imitating the voice assistants on the market, and compiled a voice assistant.

But this very mentally retarded language assistant often gives some answers according to the language logic of Kyushu, but often these answers are not the answers that a voice assistant should give.

This small discovery aroused his curiosity immediately. Driven by this curiosity, he conducted a deeper research, and finally he came to a conclusion that in the future, in terms of artificial intelligence, Kyushu language has an unparalleled advantage.

It is precisely because of the logic of the Kyushu language that this unique phenomenon is created, and when simulating in the virtual laboratory, he also added an automatic learning function to the smart assistant, and then under the attention of Li Zhenhua, the smart assistant itself But the program thinks that the learning function is getting more and more complicated.

No one told him about this discovery, and the smart assistant he compiled was not carried from his mind to reality, because he was in awe of the unknown, and he was afraid that something out of hand would happen if it was brought into reality. .

So he is very cautious in this regard, maybe in the future when he really understands the artificial intelligence assistant he created, he will bring him into reality.

After the antique transportation company finished loading all the vehicles, Li Zhenhua also brought the workers transferred from the aircraft workshop and set off for the new company in Daocheng. Of course, his mode of travel was still protected by many bodyguards.

He had the car leading the way, and behind him was a convoy of sixty container semi-trailers. Under his leadership, the convoy drove onto the highway and headed straight for the island city.

As for the high-speed convoy, no matter what the speed of Li Zhenhua's car in front is, the trucks behind are always moving at a constant speed of 100 kilometers per hour, even if they slow down, they are still moving together.

In fact, Li Zhenhua didn't have to worry about any problems with the transport convoy at all. They were very experienced in transporting antiques, and the workpieces transported this time were carried out in the same way as transporting antiques.

At the end of the transport convoy was a white tiger truck. The huge space inside was converted into a control room, where the entire convoy could be seen running.

And above the convoy, there are four drones flying, monitoring the convoy's driving at any time.

Especially after the Kyushu God Beast researched the high-density graphene battery, this kind of battery with extremely high energy density in Kyushu has affected many aspects. Man-machines all use graphene batteries.

Let them implement some transportation plans that could not be realized or were not easy to realize.

The transport convoy along the way was dispatched without any accidents, and they were transported to the island city in the safest and fastest way.

During their transportation along this road, the rate of return was extremely high. Whether it was a private car or a transport truck, they were all shocked by the transportation team composed of 60 vehicles, and everything was so orderly.

Some private cars didn't feel much when they just overtook, but they couldn't finish the convoy after that. The convoy was so long that some private cars even missed the next stop.

After entering Daocheng, the people from Daocheng's new company were waiting at the expressway. After seeing Li Zhenhua and the others coming, the job of leading the way was handed over to the people here.

And Li Zhenhua's convoy also left the transport convoy and drove towards the location of the new factory by itself.

This is the first time he has come to the new factory area in the island city. Next, it will be assembled during processing. He wants to inspect the site to see if the newly built factory buildings and other facilities here are in line with the factory design plan he gave before. .

If there is something wrong with the construction, it is best to bring it up now and have someone rectify it. It will be too late to wait until the machining center is assembled and then rectified.

For the shockproof of the new factory, he designed several anti-vibration trenches for the factory, just to prevent the vibration from affecting the machining accuracy of the machining center. The right place, now is the most suitable time for rectification.

Five cars came to the new factory area, and the employees of the three companies who had known that he was coming, as well as the management personnel of the Ministry of Industry, all came out to welcome him in, and then, accompanied by these people, began to inspect the entire factory area.

Although he seemed to wander around the factory area, the real situation is that he has already measured the size of the pair clearly, and the size is clearly related to the design in his mind. Comparing the pictures one by one, it really made him find a lot of small problems.

But these small problems will not have any impact, so he didn't bring them up. It is nothing more than ~www.mtlnovel.com~ that will cause some small troubles for users in the later use process, but they are all harmless.

If he pointed out these small problems, it would undoubtedly make those partners think that he was looking for trouble for nothing, picking bones in eggs, so Li Zhenhua knew but he didn't point it out.

While he was circling around the factory area, those transport convoys were also led by the guides to this side, but there was not enough space here for all the transport convoys to stop.

Fortunately, the location of the factory area is very remote, and there are not many vehicles on the road leading to the factory area, so the convoy stopped at the side of the road, and then it was time to wait for the unloading time.

The driving of the truck actually caused a lot of vibration. Fortunately, there was no machining center and other equipment at this time. After the machining center was officially put into use, this large transport vehicle would strictly follow the process of entering the factory.

Take the shock absorption road specially designed for the transport truck, so that it will not have any impact on the machining center.

These things are all summed up by Li Zhenhua in the virtual laboratory after a long time and a lot of experiments. During this period, he modified the design drawings of the factory building for an unknown number of times.

It can be said to be extremely strict, and all these things are done for the preparation of the machining center later, or for the machining accuracy of large workpieces.

This kind of strict preparation is not useless, nitpicking, and simply finding faults, all of which are reasonable, and after seeing the design plan, the three partners all put away their contempt.

I am more and more admirable for the beasts of Kyushu!

7017k

Chapter end