Starting Off With A Blacksmith Workshop Chapter 121

After taking pictures of his head, he then displayed three virtual screens of plug-in data that he hadn't seen for a long time.

[Ingenuity (Humi level): "Proficiency: 126589/100000,

Upgrade conditions: 1. The necessary conditions for upgrading have been met, and the products developed have been approved by users, 45876/30000

2. Users have a strong desire to upgrade and feel that their accuracy is too low. "

Do you want to upgrade: yes/no]

【Eye of Analysis (Humi Level):···

Upgrade preconditions: Ingenuity reaches the nanometer level, this skill will be automatically upgraded! 】

【Virtual Laboratory (Humi Level):···

Upgrade conditions: Ingenuity and Analytical Eye reach the nanometer level at the same time, and the virtual laboratory will also adjust the precision to the nanometer level. 】

Seeing the introduction of the three skills, he didn't expect that the three skills that he hadn't paid attention to for a long time had already met the conditions for upgrading.

But this is not right, it has not been upgraded yet, so why is the time flow of the virtual laboratory different!

No matter how he thought about it, he couldn't figure it out, so he could only put this aside.

It is still important to upgrade skills, this issue can be considered later, anyway, it is a good thing for him.

Immediately afterwards, I focused all my attention on skill upgrades, the root skill of everything: ingenuity.

Looking at the upgrade conditions written on it, he was very puzzled, and he couldn't find any upgrade conditions at all.

I didn't know how to meet these conditions, so I suddenly said that I met the upgrade conditions in a daze.

This system is also too unqualified, there is no hint at all, if it is not discovered that the time flow rate of the virtual laboratory is different this time,

He doesn't know when he will pay attention to whether the skills can be upgraded!

I can't figure out the upgrade, but it's a good thing to upgrade. I don't know if it can be upgraded to the micron or nanometer level this time.

But he guessed that with the systematic operation, it should not be such a simple upgrade of a unit.

Thinking of this, he also stretched out his hand to the virtual screen in front of him displaying skills.

The hand slowly approached the upgrade prompt, and clicked on it.

After clicking, he didn't feel the slightest change in the virtual laboratory, and his senses didn't feel anything.

When I looked at the three skills in front of me again, I saw that the suffixes of the three skills had all changed.

[Ingenuity (micron level): …

Analytical Eyes (micron scale):…

Virtual Lab (Microscale):  …]

"It didn't make any trouble. This doesn't seem to be the style of the system. Last time I made an eliminated Humi, this time it shouldn't be so simple!"

After looking at the three skills in general, I looked at them carefully,

Sure enough, there are a few small characters behind the micron level, if you don't pay attention, you really can't find it!

Micron level, the current accuracy is 0.05 micron.

what's going on? Micron-level with a decimal point?

What is the accuracy of this? Asking myself in my heart, I was also silently converting smaller units.

0.05 microns = 50 nanometers.

fifty nanometers? The precision is so high? That is to say, the precision in his hands can reach 50 nanometers now!

What is the concept of fifty nanometers, let's put it this way, Intel's 486CPU manufacturing process is 1 micron,

After entering the new century, the manufacturing process of the Pentium dual-core CPU is only 45 nanometers.

You must know that this can be regarded as the mainstream chip in 2009, and its manufacturing accuracy of 0.05 microns,

If you have the tools to work hard, you can rub out chips with a precision of 50 nanometers by hand.

As for him, he already has all the blueprints of Buddha 14, which of course include electronic systems and other things,

With an accuracy of 50 nanometers, he can completely rub out the electronic system of Buddha 14 by hand.

This is really a surprise, and now he feels that he can change his name in the future,

It is called Li·Ouhuang·Humanoid CNC Machine Tool·Humanoid Lithography Machine·Humandoll...·Zhenhua.

Not only has the manufacturing precision of mechanical equipment improved, but now even high-precision things such as chips can be prepared.

As long as the conditions are right, it is not difficult to hand chip?

With such precision, I suddenly feel so awesome!

It seems that after going out, he has to buy some wafers. He has already decided that his new model is completely handmade, even the circuits inside are the same.

Originally, when I entered the virtual laboratory, I wanted to figure out the problem of time flow, but now it has become an incidental solution.

The first thing to consider is the skill upgrade and what impact it can bring to him.

The precision of my own hands has improved, and the things I will make in the future will be more seamless, reaching the level where people can't see the gaps with the naked eye.

He guessed that the change in time flow rate may be related to the skill reaching the upgrade condition.

The accuracy has also been figured out, and then I looked at the upgrade conditions.

Immediately, the pupils of the eyes shrank, and he let out a sigh.

'Hey, the system's consistent style is really good at tidying up! '

[Upgrade conditions: You will know when you need it! 】

"Oh shit…"

Throwing this aside, and after thinking everything through, he withdrew from the laboratory.

Lying on the bed, the precision of fifty nanometers made him think a lot, especially the impact of nanotechnology on the human body.

He couldn't help but imagine that if the precision reaches the picometer level in the future, then he will be able to create nano-robots.

With nano-robots at night, there will be a way to remove tumors in the human body in the future.

And it's not just tumor removal, thrombus removal, or bursting of cardiovascular and cerebrovascular vessels, but also nano-robots can be used to carry materials to repair blood vessels.

Anyway, it is a particularly promising direction of discovery. It is possible that the human life span will be greatly extended in the future, and it will have a great connection with nanorobots.

Thinking of this, I couldn't help feeling a little excited, but then I woke up.

"I will do these dreams in the future. Even if I think about it, it will be a waste of effort without the corresponding accuracy. I'd better think about how to improve the current model aircraft."

After morning exercises, the two of them took a shower and had breakfast, Li Yun went to the company, while he continued to plan his plans in the hotel.

The first thing to solve is the engine problem, the turbojet engine,

The air passes through the air inlet to the compressor, and after being compressed by the multi-stage compression impeller, it reaches the combustion chamber.

The fuel is mixed and detonated in the combustion chamber, and then expanded through the turbine, and the high-temperature and high-pressure gas is ejected from the tail nozzle to generate thrust.

No matter how advanced the turbojet engine or turbofan engine is, their principles are the same.

And it was never the design that plagued the engine, but the materials used on the engine.

High temperature and high pressure resistant materials that can withstand multiple pressures such as high temperature, high pressure, and explosion.

Materials are the key to the engine. Kyushu has never lacked smart people, but Kyushu is indeed a bit late in developing in some fields.

This also caused the heart problem of Kyushu's Veyron combat power, which cannot be solved by eating and drinking.

After his thoughts diverged, he thought of a lot, and retracted his thoughts. He also planned to finally start the research and development of the engine.

The direction of choice is to start with the material first,

Knowing what he should do, after exercising his body, he leaned on the comfortable sofa and closed his eyes.

In the virtual laboratory, this time, there is no such a large venue, but a rather small laboratory.

In the empty room, between his waving hands, the room was filled with various equipment,

The equipment he manifested is all in the Hujiang Science and Technology Laboratory.

And the research equipment about materials that he came into contact with in various companies with his teacher before.

The research on superalloy materials has begun. Compared with the previous methods, the research on materials has made great progress.

That method didn't work for him because it was a computer simulation,

In the virtual laboratory, the computer can be simulated, and then the computer can be used to simulate material development.

This is basically a nesting doll, and the virtual laboratory was built in his mind in his guess.

If he were to build another computer and do a lot of calculations, he felt that his brain would burn out.

With these prerequisites, he didn't even have the idea of ​​experimenting.

Then the method of research and development can only use the old method. Fortunately, he has the materials on the turbojet 5 and Pratt & Whitney Buddha 110 as a reference.

With reference, there is also a direction, which is to improve on the original formula,

Instead of conducting research and development of a material from scratch, the difficulty of research and development plummets.

Speaking of simulation, his current operation in the virtual laboratory is equivalent to using a computer to simulate!

The idea is determined, and the first choice is to study the core material of the turbojet five.

Everything is done step by step, and it is impossible to understand the materials of the Buddha 110 engine at once.

Going around and returning to the research and development of materials, it also made his old profession of materials science and engineering not so deserted.

All kinds of rare metals manifested in front of him one by one, each of which was a finished metal powder.

With equipment and raw materials, his research began.

In the high-pressure reactor, put various metals according to the ratio, and then let the reactor start to work.

Powdered metals are gradually melted in the reactor, and many different metals are tightly combined under high pressure.

After a long time, the reactor also stopped under his control.

The metal inside the controller flowed out, and after a series of operations, a half-meter-square piece of metal exuding silvery luster was finally obtained.

After getting the metal block, he immediately carried out various tests on this good-looking piece of metal.

It's just a pity that after the final test, the metal he obtained this time compared with the original formula, did not meet the requirements of the original formula at all.

Once there is a failure, there will be countless failures after that, but it will eventually succeed,

With this in mind, his journey to prepare high-temperature materials began.

It's just a lot of experiments, there may be chances in the middle,

These happen by accident, and the metal produced may be more complex than the required metal.

In his large number of experiments, the probability of accidental occurrence has greatly increased, and this accidental occurrence has become inevitable.

While he was researching the materials, the principal and secretary of Hujiang University of Technology had already been reprimanded by the superior education department on the phone.

After the two of them hung up the video call, they felt a little tricky at the same time. It was just a video, and they never expected to become so passive.

"Secretary, what do you think we should do, let's fire Song Yigeng, now our superiors are looking for us to talk,

In other words, Song Yigeng should have already been named by the leaders. If we continue to keep her, our school may be involved in future events! "

The principal of Hujiang University of Technology looked at the secretary on the opposite side asking for advice, but the secretary did not speak.

But the hand he knocked on the table hastily showed his inner anxiety.

"Let's open it, but it won't work if you don't open it. You said that Fang Fang is the same. What kind of teacher did you introduce to us? How dare you make such nonsense!"

In this way, the two leaders confirmed Song Yigeng's fate, and the secretary who resolved the matter,

Just about to show a smile, then I remembered something about the person who posted the video this time.

"Principal, have you contacted the publisher of the video? It has caused such a negative impact on us, we have to get him to take the video off the shelves quickly.

No, after contacting him, give him some money as a hush money! "

After expressing his opinion, the two fell into silence at the same time.

"Secretary, we haven't been in touch with the person who released this video, and we've made many phone calls, but the other party didn't answer!

And according to our investigation, this person was a student of our school before. After the incident happened in the laboratory last time, he was blamed by our vice principal in charge of the security department.

The other party should hate us very much, even if we get in touch, we may not be able to achieve our purpose. "

"Okay, you should go get in touch first, and quickly make an announcement to expel Song Yigeng. It is only right to appease these passionate students in the school now."

After discussing the countermeasures of the two, they each went to do their own part of the work.

The school also quickly posted the announcement, which said nothing more than that Song Yigeng would be expelled, and then he would separate himself from Song Yigeng.

For the school, this matter may have passed like this, but for the majority of netizens, it is not the case.

Peace of mind has never been the first choice of cyber fighters. Seeing the school's good attitude of admitting mistakes, they shifted their attention to the protagonist of the incident itself and the video publisher.

Gradually, under the powerful human flesh technology of the vast number of netizens, Li Zhenhua's personal experience also surfaced in front of everyone.

At this moment, many netizens seem to have re-acquainted with Hujiang University of Science and Technology,

Don't care how innocent the previous announcement was, but at this moment, many netizens no longer believe that the school is innocent.

The matter is still fermenting, not only about the video he released, but also about his own experience and the remarks of many public intellectuals,

All kinds of speeches are flooding the Internet, as if a war without gunpowder is gradually spreading.

There are also some careful netizens who slowly connected the people who started the incident, covering the Internet like a big net.

After these netizens found out, they didn't say anything, but continued to pay attention to the context of the incident.

In the virtual laboratory, another half a year passed, and he finally got the key technology of materials.

He got a super high temperature alloy, this alloy is fully capable of turbojet engine operation,

The resulting high temperature, high pressure, and high speed can be said to be a raw material that is especially suitable for making engines.

With the foundation of all these materials, he then started the research and development of the engine.

The first thing to be solved for a jet engine is the combustion chamber of the engine, which is the most important component.

It's not that other parts are not important, the combustion chamber is the first place where air and kerosene mix to ignite and explode.

As for the processing of the combustion chamber, he still chose to use a machine tool to mill it out.

Under his hands, an engine combustion chamber with a diameter of 60 centimeters was milled out with a large piece of metal.

And drill out many calculated cavities on the combustion chamber together,

And he also made some innovations to the engine. For the main bearing of the engine, it chose air bearings.

For this air bearing, he has spent a lot of effort, using his unique technology optimized by plug-in in many places.

With this air bearing, all the parts in the engine that need to rotate can rotate more smoothly.

After all the parts of the engine were manufactured, he also assembled the engine with the help of his analytical eyes,

As soon as I got started, I went in the most precise direction. Even the dynamic balance inside was adjusted through the analytical eye when it was assembled.

The turbojet engine was built by him little by little in the virtual laboratory.

After the engine was built, the entire engine was in the shape of a cylinder, with a length of 250 centimeters and a diameter of 65 centimeters. It was a very slender engine.

After it is built, of course the engine test run must be carried out, but he lacks a test bench,

Some data cannot be measured at all. The only thing he can test is how much thrust the plane has.

The engine manufactured by him has a total weight of 300 kilograms. He didn't know it until he measured it, but when he really knew the total weight, he himself was shocked.

With a total weight of 300 kg, no matter how you look at it, it is not comparable to an aircraft model engine.

The final tested thrust was actually 3600 kg, so the thrust-to-weight ratio reached 12.

How much is three thousand six hundred kilograms? It is 3.6 tons, which means that the engine can generate 3.6 tons of thrust,

And the plane he designed has twin engines, with a total thrust of 7.2 tons, which can be used as the power of the fifth master for the monster he created.

You must know that the afterburner thrust of the turbojet five is only 3.8 tons. At this moment, he also has deep doubts about this engine.

What is his original intention? Making model airplanes, but with such a powerful engine now, does the airplane still have a little shadow of model airplanes?

But it has reached this point, so it can only be done, and it can't be done halfway!

Along with his manufacture, all relevant drawings of this newly designed engine were also formed,

And he also wrote a huge and complicated process manual, and when he got out the process manual,

It also proves that in reality, as long as he is well-equipped, he can rub out the engine according to this manual.

He made an engine, and with a wave of his hand, an identical engine appeared beside him.

With the two engines in place, the next step is to consider the variable-sweep wing casing of the aircraft.

He was already prepared for this. When he was making materials, he didn't just get out the materials for the engine.

Instead, I got all the materials needed to make an airplane. It sounds incredible, but the life of hanging up does not need to be explained.

Everything that is unreasonable will eventually become reasonable with the help of plug-ins.

The structure of the variable receiver was completely reduced by him according to the internal structure of the Buddha 14, and then he optimized the structure according to the prompt of the analytical eye.

With the two key technologies of the engine and the variable-sweep wing, there is no difficulty in other parts of the fuselage.

In the virtual laboratory, the trial production of the aircraft model is in full swing.

And on some parts of the aircraft, he also carried out lightweight treatment, such as the fuselage, he used carbon fiber as a whole,

Carbon fiber is a material with high strength and low density. The low density means that this material is light.

It also has high temperature resistance, fatigue resistance, and better electromagnetic shielding performance.

Anyway, the place where there is no need to use metal components on the fuselage is made of carbon fiber.

After he built the whole model airplane, he himself was overwhelmed by the airplane he built himself.

In terms of appearance, this aircraft is really handsome, with independent tail rudders, double tail fins on the engine, and circular tail nozzles that can change directions.

Strong landing gear, and unique air intakes on both sides of the nose,

Every part of the fuselage has an unparalleled charm.

And now this model airplane, um, let's call it a model airplane,

The position of the nose does not arrange the position of the pilot, that is to say, the position of the nose and the cockpit of the aircraft model are all holes.

The space inside is for him to install avionics equipment. Without the pilot cockpit, it means that there is more space inside.

The larger the space, the larger the space to play, the larger the place to install the electronic control system, and let it be done.

Looking at the model airplane in front of me, it has a total length of eight meters and a wingspan of 8.5 meters.

In the form of swept wings, it has a wingspan of 4.2 meters and a height of 2 meters.

The total weight is 5 tons, when he saw this ~www.mtlnovel.com~ his heart was really pounding.

'Damn it, what kind of monster did I create, this thing is no different from a fighter jet,

The total weight is 5 tons. Just listening to this weight, you will not think that this is a model airplane.

If this is equipped with missiles and the avionics are improved, isn't it just an unmanned fighter jet?

Damn, I researched a fighter? My brain was kicked by a donkey before! '

Feeling emotional in my heart, looking at the plane in front of me at a loss, but fortunately this is in the virtual laboratory,

If it was outside, he would directly pull out such a big guy. Don't think about it, the Kyushu Security Bureau would definitely visit him.

And he came to visit him with a silver bracelet, and he might be invited to drink tea and be a guest in the security bureau.

At this moment, he could only stare blankly at the fighter plane in front of him, thinking about what to do!

PS: My friend's book will be on the shelves tomorrow, classified into light novels! Everyone is welcome to watch! The portal is below!

Chapter end